Loading ...
Loading ...
Loading ...
42
CARE AND CLEANING
ImPORTANT
Special door care instructions - The door is heavy.
For safe, temporary storage, lay the door flat with
the inside of the door facing down. Most oven
doors contain glass that can break. Do not close
the oven door until all the oven racks are posi-
tioned correctly in the cavity. Do not hit the glass
with bakeware or any other objects. Scratching,
hitting, jarring, or stressing the glass may weaken
its structure, causing an increased risk of break-
age at a later time.
Removing and Replacing the Oven Door
To remove the oven door:
1. Open oven door completely, horizontal with floor.
2. Pull up the lock located on each hinge support
toward front of the oven until the lock stops. You
may have to apply a little upward pressure on the
lock to pull it up (Figure 24 and Figure 25).
3. Grasp the door by the sides, and close the door
until the door frame makes contact with the un-
locked hinges.
4. Pull the bottom of the door toward you while ro-
tating the top of the door toward the appliance to
completely disengage the hinge levers
(Figure 26).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the
door sides. Do not use the oven door handle
(Figure 26).
2. Hold the oven door at the same angle as the
removal position. Carefully insert the hinge levers
into the oven frame until you feel the hinge levers
are seated into the hinge notches. The hinge arms
must be fully seated into the hinge notches before
the oven door can be fully opened. (Figure 26).
3. Fully open the oven door, horizontal with floor
(Figure 23).
4. Push the door hinge locks up toward and into the
oven frame on both left and right oven door hing-
es to the locked position (Figure 25-24).
5. Close the oven door.
Oven door
hinge
locations
Figure 24: Door hinge locked
Figure 25: Unlocking door hinge
Door frame flush
with hinge lock
Hinge
notch
CAUTION
The door is heavy. To temporarily store it safely,
place the door horizontally with the interior side
facing down.
Figure 23: Door hinge location
Figure 26: Setting hinges into hinge notches
Loading ...
Loading ...
Loading ...