Loading ...
Loading ...
Loading ...
SECTION I WATER SOFTENER START-UP
i i
lCĀ° PROGRAM THE TIMER
J......... _ ............................... i , ,11 ir_ ,
2. SET WATER HARDNESS
[] Press the SELECT button
(flashing) and HARDNESS.
NUMBER:
once to display 25
The grains per gallon (gpg)
hardness of your water supply 2S ]
is on your water analysis re-
porL Be sure to enter water test ,,aR_N_
results on page 2, for future
reference.
NOTE:
If your water supply contains iron, compensate for
it by adding to the water hardness number. For
example, assume your water is 20 gpg hard and con tarns
2 ppm iron. Add 5 to the hardness number for each 1
ppm of iron. In this example, you would use 30 for your
hardness number.
20 gpg hardness
2 ppm iron x 5 = 10 +10
(times) 30 HARDNESS NUMBER
[] Press the UP / DOWN buttons to set your water
hardness number in the display. The DOWN
button moves the display to 1. The UP button
moves the display to the highest setting (see
maximum setting for your model in the specifica-
tions).
NOTE:
Each press of the UP / DOWN button changes the
display by 1 between i and 25, Between 25 and the
highest number; the display changes 5 at a
time, o25, 30, 35, etc. Holding the UP or DOWN
button in changes the display twice each second,
3_
SET RECHARGE, or REGENERATION
TIME:
[] Press the SELECT button to display 2:00 AM
(flashing) and RECHARGE TIME,
Atthe2:00AMrechargetime [ _;O_A 1
setting, the softener begins re- R_C,_RG_
generation (see pages 12 and r_E
1.3) at 2:00 AM, ending no later
than 4:00 AM. This is a good time in most
households because water is not being used (see
Automatic Bypass, page 14)_If a different recharge
time setting would be better for your household,
do the following,
[] Press the UP / DOWN buttons to set the desired
recharge starting hour. Be sure to observe the
AM-PM as you did when setting the present time
of day,
NOTE:
Each press of the UP / DOWN buttons changes the
display I hour, Holding the buttons in changes the
display twice each secondĀ°
4. SET CLEAN FEATURE (optional):
[] Press the SELECT button to display OFF
(flashing) and CLEAN,
This feature is beneficial on
water supplies containing iron OFF-:
and/or high amounts of sedi- CLEA_
ments (sand, silt, diit, etc..).
When set to ON, a backwash 0r-i
and fast rinse cycle will occur
CLaN
first, preceeding the normal re-
generation sequence (see page
12). This provides extra clean-
ing of the resin bed before it is
regenerated with the salt brine_ To conserve water,
if your water supply does not contain iron or
sediments, be sure this feature is set to OFF, Use the
UP / Down buttons to change the ON / OFF
displays.
[] Press the SELECT button once again, to return
the present time, and RECHARGE TONIGHT in the
display,
I'q" 5,' ,=9']R
RECHARGE TO,
NIGHT
IF YOU NEED HELP PROG1LAMMtNG THE TIMER, CALL TOLL FREE, NUMBER 1-800-426-9345.
SEE PAGES 10 AND 11 FOR OTHER FACE PLATE TIMER FEATURES,
Loading ...
Loading ...
Loading ...