Loading ...
Loading ...
Loading ...
iSpring WDS Series Whole House Systems
Version 2020-05
Page 6
Notice:
The filter housing comes with a 1'' NPT Male inlet/outlet and will require additional fitting to
adapt to your plumbing. A shutoff valve is recommended prior to the system.
Step 1 - Measure the System and Cut the Pipe
Determine location and water flow direction for the system.
Notice:
If the water flow of the pre-installed caps union points conversely to your water flow, you can
converse the caps union by unscrewing the bolts that connect it with the bracket.
Measure, cut, and remove the section of water line where the system is to be installed. When
determining the length of pipe to cut, account for filter width, shutoff valves, union fittings,
nipple fittings, pressure gauges (if used) and bypass valve (if used).
Allow the cut line to drain. Smooth the newly cut ends down to avoid jagged points or edges.
Step 2 - Mount the Filter Bracket
Securely mount the whole house filter bracket and ensure the system is level.
Attach your plumbing to the INLET and OUTLET with 1'' male threaded adapter (not included).
Step 3 - Add on Shutoff Valve and Pressure Gauge (Optional)
Place a shutoff valve and/or a pressure gaugeon either side of the filter for ease of monitoring
and ease of service.
1) You may need to adjust pipe length or distance. Fit a pipe union onto the cut section of the main
water line.
2) Fit together pipe union and shutoff valve. Use Teflon tape on threaded fittings.
3) Simultaneously fit together shutoff valve and whole house filter using pipe nipple or hex nipple
to draw them together on the FEED side of the filter.
4) Simultaneously fit together filter and the shutoff valve on the OUTLET side of the filter. Fit pipe
union to shutoff valve on OUTLET side.
5) Check pipe length and pipe union length to see if additional pipe length or union is required.
Join pipe union and pipe.
6) Fit pipe hanger on water INLET and OUTLET side for additional support.
Step 4
Connect ground jumper wire (if necessary).
Loading ...
Loading ...
Loading ...