Loading ...
Loading ...
Loading ...
The surface units Improper cookware is being used. • Use pans which are flat and match the
will not maintain diameter of the surface unit selected.
a rolling boil or In some areas, the power (voltage) • Cover the pan with a lid until the desired
will not cook fast may be low. heat is obtained.
enough.
The surface units
will not turn on.
o
Pan does not heat
up
A fuse in your home may be blown
or the circuit breaker tripped.
The cooktop controls are set
improperly.
Pan not detected.
Pan too small for proper pan
detection
and only works with low power.
Distance between surface unit and
glass ceramic is too large.
o
o
Areas of Food spillover was not cleaned.
discoloration on the
cooktop
The surface unit
frequently cycles on
and off.
The oven will not
turn On.
The surface is hot and the model
features a light-colored cooktop.
This is normal.
Replace the fuse or reset the circuit
breaker.
Check to see the correct control is set for
the surface unit you are using.
Check whether the pots or pans are
suitable for induction.
Refer to page 23 for proper pan selection.
Use larger pan or this pan on a smaller
cooking zone. Refer to page 23 for proper
pan selection.
Check whether the surface unit is properly
positioned and touching the glass cooktop
surface.
Refer to the section on care and cleaning
of the glass cooktop on page 52.
This is normal. The surface may appear
discolored when it is hot. This is temporary
and will disappear as the glass cools.
The element will cycle on and off to
maintain the heat setting.
The appliance will
not turn on.
The range is not completely = Make sure the electrical plug is inserted
plugged into the electrical outlet, into a live, properly grounded outlet.
A fuse in your home may be blown • Replace the fuse or reset the circuit
or the circuit breaker tripped, breaker.
The oven controls have been set = See the chapter on operating the oven.
improperly.
The oven is too hot. = Allow the oven to cool.
The appliance is not completely
plugged into the electrical outlet or
a fuse in your home may be blown
or the circuit breaker tripped.
Incomplete service wiring.
Make sure the power cord is plugged into
a live, properly grounded outlet. Check the
fuse and circuit breakers.
Call for service.
Power outage. • Check to see if the house lights will turn
on. If required, call your local electric
company for service.
The oven light will The light bulb is loose or defective. = Tighten or replace the bulb.
not turn on. The switch operating light is • Call for service.
broken.
Loading ...
Loading ...
Loading ...