Loading ...
Loading ...
Loading ...
11
Electrical Installation Requirements
Installation of this product must conform with local codes or in absence of local
codes, with current Canadian Gas Installation Code CAN/CGA-B149.2. If an
external electrical source is used when appliance is installed, it must be
electrically grounded in accordance with local codes or, in absence of local
codes, with current National Electrical Code ANSI NFPA 70, or CSA Standard
C22.1, Canadian Electrical Code, Part 1.
All electrical connections are to be made in accordance with CSA Standards
Z240.6.1 electrical requirements for mobile homes.
Use a dedicated 120 volt, 60 hertz, 3-prong receptacle protected by a 15 amp
circuit breaker or time delay fuse. A qualified electrician should confirm the
outlet is properly grounded. Cooktop includes 4-foot power cord attached to
bottom of cooktop.
If a 2-prong outlet is encountered, cooktop owner must replace outlet before using cooktop. Do not cut off cord or
remove grounding prong.
When installed in mobile housing, installation is to be in accordance with CSA standard Z241.1 gas equipped mobile
housing. All electrical connections are to be made in accordance with CSA standards Z240.6.1 electrical requirements
for mobile homes.
The installation of appliances designed for manufactured (mobile) home installation must conform with Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280, or when such standard is not applicable, the
Standard for Manufactured Home Installation, ANSI225.1/NFPA 501A-Latest Edition, or with local codes or the
standard CAN/CSA-z240MH, “Mobile Homes”, and with local codes where applicable.
The installation of appliances is to be in accordance with CAN1-B149.1 or B149.2 installation code for gas burning
appliances and equipment and/or local codes. Part 1 and/or local codes.
All electrical connections are to be made in accordance with CSA C22.1 Canadian Electrical Code.
Installation
Loading ...
Loading ...
Loading ...