Loading ...
FULL ONE YEAR WARRANTY ON CRAFTSI'_AN BAND SAW
H within one year from the date of purchase, this Craftsman Bared Saw fails due to a defect in
material or workmanship, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVICE
CENTERtDEPARTMENT THROUGHOUT THE UNITED STATES.
THiS WARRANTY APPLIES ONLY WHILE THIS PRODUCT iS USED IN THE UNITED STATES.
This warranty gives you specific legat rights, and you may also have other rights which vary from
state _o stale,
SEARS, ROEBUCK AND CO_ 698J731A, Sears Tower, Chicago, }L 60684
enera! safety instructions for power
tooJs
t_ KNOW YOUR POWER TOOL
iabe_s affixed _n _he _ool Lear_ {ts ar)p_mauon
and lm],,tahons as w!}_l as 1he ::,[ec_fm ootent:ai
f'tazards pecui_af 1o tf_s too
2, GROUND ALL TOOLS
Th_'_ tOOt ___ equip'0@d ',,%qth ;_r'_ cg_DrOW:_d 3
COndUCtO_ COrd and a 3-pronq gtounom_g Wpe
pit_q to h! the proper _roundmg type rece[)tacte
The qT@et_ G_.)ndi.Jctor +n tr_e cord is the _rour++o
mq wire Never connec_ the gr_+_:,_ wire to a !lye
terminal
3. KEEP GUARDS IN PLACE
and ah(jnmen_
4. REMOVE ADJUSTING KEYS AND WRENCHES
[:Orm _ b,abH Of checkmq _ F_x? lrw]! _'v'< _ncI
adjus_ln_ wrencl_es _rx._ ren]ove(_ _orn tool
5, KEEP WORK AREA CLEAN
Chdtered areas and ben,;hen mw_e a<c_dents
F_oot must no1 be siippery due _O wax o_ saw
dUSl
6. AVOID DANGEROUS ENVIRONMENT
Drm_ u,_e t_ower tools m damp or we_ locaIions
or expose them to ram Keep work area welt
_Hjhted Provide adequate surrounding work
SDaCe
7. KEEP CHILDREN AWAY
At_ vtsdors Should I)@ kel.)t a safe dmtance horn
work area
8. MAKE WORKSHOP CHILD-PROOF
-- w_{h p(.adiocks, r]'laster S',gqtCheS. or bv r@
mowng sfader keys
9. DON'T FORCE TOOL
It w_!I do the job better arid safer at the fate for
wh<:h it was des_gnecL
10. USE RIGHT TOOL
Don't force toot of attachment to do a job _t was
not designed for.
tl, WEAR PROPER APPAREL
Do not wear loose clothing, gloves, neckhes or
jewelry _rings, wristwatches) to get caught in
moving parts NONSLIP footwear is recom.
mended. Wear protective hair covering to con-
tain !ong hair. Rot! long sleeves above the
eibow.
12. USE SAFETY GOGGLES (Head Prolection)
Wear safety goggles (must comply with ANSi
2
Z87.1) at a{! times. Everyday eyegiasses only
have ir_pact resistant lenses, they are NOT
saf_,,y 9_asses. Also. use face of dust mask _f
cul!m{:_ operation _s dusty, and ear protectors
WHUGS Or TT1Uf{S) dUi'ir_g extended periods of
opera_ ran.
13. SECURE WORK
Use cla,,r_ps or a v_se to ho!d work when practD
(;a_ It's .safer tf_ar_ us_r_f! your hand, frees both
hands tO operate tooi_
t4. DON'T OVERREACH
K.eep proper foot,rig and baiance at all times.
15. MAINTAIN TOOTS WITH CARE
Keeb tools sharp and clean for best and safest
Derforn_ance. Foitow instructions for !ubricating
and chang_ ng accessories
16. DISCONNECT TOOLS
bef<_re servicing; when changing accessories
such as blades, bits,cutters, etc.
17. AVOID ACCIDENTAL STARTING
_ake sure switch is in "OFF" posdion before
plugging in.
18. USE RECOMMENDED ACCESSORIES
(.}onsull the owner's manual for recommended
accessories Follow the instructions that
accompany the accessories. The use of im-
proper accessories may cause hazards.
19. NEVER STAND ON TOOL
Serious iniury could occur if the toot is f_pped
or if the cutting too_ is accider, taily contacted.
Do not store materials above or near the toot
such that it is necessary to stand on the tool to
reach them.
20. CHECK DAMAGED PARTS
Before further use of the tool. a guard or other
part that is darnaged shouid be carefuily check-
ed to ensure that _t wdi operate properly and
peHorrn its intended function. Check for aligr>
rnent of rr'_oving parts, binding of moving parts_
breakage of parts, r'nount_ng, and any other con-
ditions that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced.
21. DIRECTION OF FEED
Feed work into a blade or cutter against the
direction of rotation of the blade or cutter only.
22. NEVER LEAVE TOOL RUNNING UNATTENDED
Turn power off. Don't lea,_e tooi until it comes
to a complete stop.
Loading ...
Loading ...
Loading ...