Loading ...
Loading ...
Loading ...
Initial commissioning
58
Before using for the first time
Allow the refrigeration appliance to
stand for approx. 1hour before con-
necting it to the power supply.
This will prevent potential functional
problems with the refrigeration appli-
ance.
Packaging material
Remove all packaging material from
the inside of the appliance.
Always remove all packaging mater-
ial, including adhesive tape, before
switching on the refrigeration appli-
ance. The adhesive tape is difficult to
remove from cold surfaces.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
Clean the inside of the appliance and
the accessories.
Choosing the right door assistant
(Push2open/Pull2open)
The door assistant helps you to open
the appliance door.
You can choose between the two door
assistants Push2open and Pull2open (see
“Selecting additional settings – Switch-
ing on the Door assistant ”).
The default door assistant is Push2open.
Select the
Pull2open door assistant if your refri-
geration appliance has a furniture
front with a handle.
Select the
Push2open door assistant if your refri-
geration appliance has a handle-free
furniture front.
Inserting the Active AirClean filters
Your refrigeration appliance is equipped
with 2 Active AirClean filters which
neutralise unpleasant odours in the re-
frigerator section.
Insert the Active AirClean filters sup-
plied as described under “Cleaning
and care – Replacing the Active
AirClean filters”.
Loading ...
Loading ...
Loading ...