Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
31
Affix edge protection to the adja-
cent furniture fronts.
Insert the plug connector at the back
of the refrigeration appliance (see “In-
stallation – Electrical connection”).
Insert the plug into the socket.
The electrical socket must not be
concealed behind the appliance and
must be easily accessible in an
emergency.
Risk of damage due to electrical
overload.
If the refrigeration appliance is elec-
trically overloaded, this can cause a
short circuit and thus damage your
refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cable to prevent
it becoming caught: tie a piece of string
to the middle of the cable and as the re-
frigeration appliance is being pushed
into the niche, pull the cable forward
underneath the appliance.
Carefully push the refrigeration appli-
ance into the niche.
If the refrigeration appliance cannot
be pushed into the niche (because
the floor is uneven, for example), un-
screw the rear adjustable feet slightly
(see “Installation – Aligning the refri-
geration appliance”) and slide the re-
frigeration appliance into the niche.
Remove the edge protection from
the adjacent furniture fronts.
Loading ...
Loading ...
Loading ...