Loading ...
Loading ...
Loading ...
4 Turn the blower unit 180° so that the fan blade openings are facing out the back of the microwave.
5 Place the blower unit back into the opening. The blower unit exhaust openings should match the exhaust
openings on back of the microwave.
6 Slide the exhaust adapter into the guides on the back of the microwave and push in until it is aligned with the
blower motor screw holes, then secure with the blower motor screws.
7 Secure the blower unit in the microwave with two of the screws you previously removed.
Note
Make sure that the damper hinge is at the top and that it can swing freely.
BEFORE
AFTER
Fan blade openings facing the
back
Exhaust adapter
Guides
Blower motor screw
Exhaust adapter
Blower plate
30
WWW.VINOTEMP.COM
Loading ...
Loading ...
Loading ...