Loading ...
Loading ...
Loading ...
1 Remove the rear wall template.
2 Remove the mount
ing plate from the back of your microwave using a Phillips screwdriver.
3 Insert the toggle bolt(s) through the front of the mounting plate into the hole(s) that
are not going into a stud,
and then attach the toggle wings ¾" onto each bolt. Hold
your mounting plate up to holes in your wall to identify the correct position.
4 Place the mounting plate against the wall and insert the toggle wings into the
holes you drilled in the drywall. Pull the mounting plate away from the wall to
help tighten the toggle wings.
Note
The top of the mounting plate is indicated with an ar-
row. The mounting plate’s hooks are on the front.
Note: Depending on
your stud locations,
your installation may
look different. You
should insert toggle
bolts into drywall and
wood screws into studs.
Bolt
Mounting plate
Wing
Step 5: Option B - A
ttach the mounting plate to the wall
25
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Loading ...
Loading ...
Loading ...