Loading ...
Loading ...
Loading ...
Before Setting Surface Controls 9
BEFORE SETTING SURFACE CONTROLS
Gas Surface Burners
Your appliance is equipped with gas surface burners that have
different BTU ratings. The ability to heat food quicker and in
larger volumes increases as the burner size increases
(
Figure 1).
Regardless of size or location, always select cookware that is
suitable for the amount and type of food being prepared. Select
a burner and flame size appropriate to the pan. Never allow
flames to extend beyond the outer edge of the pan.
Burner Caps and Burner Grates Assembly
To prevent flare-ups use the cooktop with all burner caps
properly installed.
Placement of burner caps
IMPORTANT! Your new range comes with two styles of
burners.
• Follow the instructions carefully when placing caps on
burners as shown in
Figure 2.
• Place a burner cap on each burner head, matching the cap
size to the head size. The cap for each burner has an inner
locating ring which centers the cap correctly on the burner
head. Be sure that all the burner caps and burner heads
are correctly placed before using your appliance.
• Make sure each burner cap is properly aligned and level.
• Turn the burner on to determine if it will light. If the burner
does not light, contact the installer. Do not service the
sealed burner yourself.
ATTENTION: Do not slide the burner caps on the cooktop,
doing so can damage the surface.
Setting Regular Burner Caps
Figure 1: Burner controls and location
Figure 2: Placing cap properly on burner head
Burner Cap
Burner Head
Correct Burner Cap
Placement
Incorrect Burner Cap
Placement
Burner Cap Lip
Loading ...
Loading ...
Loading ...