Loading ...
Loading ...
Loading ...
MOWlNGTIPS
• Under certain conditions,such as very
tall grass, it may be necessary to raise
the height of cut to reduce pushing
effortand to keep from ovedoading the
engine and leaving clumps of grass
clippings. It may also be necessary to
reduce ground speed and/or run the
lawn mower over the area a second
time.
• For extremely heavy cutting, reduce the
width of cut by ovedapping previously
cut path and mow slowly.
• For better grass bagging and most
cutting conditions,the engine speed
should be set in the fast position.
• When using a rear discharge lawn
mower in moist, heavy grass, clumps of
cut grass may not enter the grass
catcher. Reduce ground speed
(pushingspeed) and/or run the lawn
mower over the area a second time.
• Ifa trailof clippingsis left on the dght
side of a rear discharge mower, mow in
a clockwise directionwith e small
ovedap to collect the clippingson the
next pass.
• Pores in cloth grass catchers can
become tilled with dirtand dust with
use and catchers willcollect less grass.
To prevent this, regularly hose catcher
off with water and let dry before using.
• Keep top of engine around starter clear
and clean of grass clippingsand chaff.
This will help engine air flow and
extend engine life.
MULCHING MOWlNGTIPS
IMPORTANT: For best performance,
keep mower housing free ut buitt-up
grass and trash. See "CLEANING" inthe
Maintenance section of this manual.
• The special mulching blade will recur
the grass clippingsmany times and
reduce them in size so that as they fall
onto the lawn they will disperse into the
grass and not be noticed. Also,the
mulched grass will biodegrade quickly
to provide nUtrientsfor the lawn.
Always mulch with your highest engine
(blade) speed as this will providethe
best recuttingaction of the blades.
• Avoid curlingyour lawn when it iswet.
Wet grasstends to form clumpsand
interferes with the mulching action.The
best time to mow your lawn is the early
afternoon. At this time the grass has
dded and the newly cut area willnot be
exposed to the direct sun.
• For best results, adjustthe lawn mower
cutting height so that the lawn mower
cuts off only the top one-third dt the
grass blades. If the lawn isovergrown it
will be necessary to raise the height ol
cut to reduce pushing effortand to keep
from ovedoeding the engine and
leaving clumps of mulched grass. For
extremely heavy mulching, reduce your
width of cut by ovedapping previously
cut path and mow slowly.
• Certain types of grass and grass
conditionsmay require that an area be
mulched a second time to completely
hide the clippings. When doing a
second cut, mow across or perpendicu-
larto the first cut path.
• Change your cutting pattern from week
to week. Mow northto south one week
then change to east to west the next
week. This will help prevent matting
and graining o! the lawn.
9
Loading ...
Loading ...
Loading ...