Loading ...
Loading ...
Loading ...
Theoperationofanylawn
mowercanresultinforeign
objectsthrownintothe
eyes, whichcan result in
severe eye damage.
Alwayswear safety glasses or eye
shieldswhile operating your lawn mower
or performingany adjustments or repairs.
We recommend a wide vision safety
mask over spectacles or standard safety
glasses.
HOWTO USEYOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory
foroptimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
ACAUTION: Federal regulations require
an engine controlto be installed on this
lawn mower in order to minimize the dsk
of blade contact injury.Do not under any
circumstancesattempt to defeat the
functionofthe operator control.The blade
turns when the engine is running.
Your lawn mower is equipped with an
operator presence control bar which
requiresthe operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower
wheels for high cut, adjust cuttingheight
to suityour requirements. Medium
positionis best for most lawns.
To change cutting height, squeeze
adjuster lever toward wheel. Move
wheel up or down to suit your require-
ments. Be sure all wheels are in the
same setting.
NOTE: Adjuster is propedy positioned
when plate tab inserts intohole in lever.
Also, 9-position adjusters (it so equipped)
allow laver to be positionedbetween the
plate tabs.
LewerWheelsfor Hig/nCut pr._lste_
RaiseWheelsforLowCut Lever
TO CONVERT MOWER
Yourlawn mower wsa _ rsadyto ba
usedas a rnulch_. Toconvert tobagging:
REAR BAGGING
Liftrsar dnorofthe lawnmowerandplace
the grass catchorframe hooksontothe
doorpivotpins.
To converttomulchingoperation,remove
grasscatcherand dose reardoor.
ACAUTION: Do notrun your lawnmower
without clippingdeflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear
door removed or propped open.
Pivot ' Rear Grass
catcher
handle
Catcher frame hook
TO EMPTY GRASS CATCHER
1. Lift up on grass catcher usingthe
frame handle.
2. Remove grass catcher with clippings
from under lawn mower handle.
3. Empty clippings from bag using beth
frame handle and bag handle.
NOTE: Do not drag the bag when
emptying; it will cause unnecessary wear.
/
Grass
catcher
frame
handle
Bag
I
7
Loading ...
Loading ...
Loading ...