Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TO CHANGE TEMPERATURE
SETTING: YOU WILL SEE:
@
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
Note: Tap or hold either up (_) or down ( _ ) button until the desired temperature is seen on the display. This temperature will be automati-
cally maintained anywhere between 60°F (16°C) and 90°F (32°C) for cooling mode. The temperature will be automatically maintained anywh-
ere between 55'F (13"C) and 80°F (27°C) for heating mode. If you want the display to read the actual room temperature. See 'qo Operate
on Fan Only" section on Page 7.
TO ADJUST FAN SPEEDS:
YOU WILL SEE (10-99):
@
DO THIS:
PRESS
TO SELECT:
FASTER
SLOWER
A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the "SLOWER" button is pressed the motor speed
will slow down at various intervals, down to a minimum setting of 10. To speed the motor up, press the "FASTER" button. The speed will incr-
ease at multiple intervals to a maximum setting of 99. Display will revert back to temperature setting after a short time.
TO USE AUTO TEMP FEATURE:
DO THIS:
PRESS
AUTO TEMP
LIGHT On
YOU WILL SEE:
Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go
to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.
Loading ...
Loading ...
Loading ...