Loading ...
Loading ...
Loading ...
To turn
cleaner on,
push switch
down. To
turn cleaner
off, pull the
switch up.
I
HANDLE ADJUSTMENTS
The handle on your cleaner has three positions - storage, operating,
and low (for reaching under low furniture). The handle can be low-
ered by stepping on pedal at the left rear of cleaner. The handle
should always be in storage position when cleaning tools are used.
RUG ADJUSTMENTS
The rug adjustment lever located on the right
rear of the cleaner offers four different positions
for better cleaning on a wide range of carpet. The
four positions are: LOW, NORMAL, HIGH and
SHAG.
To select the desired rug position, tilt the cleaner
forward and adjust the lever until it "clicks" into
the desired position.
For best results the lever is conveniently adjusted
by hand.
Select the LOW setting for cleaning low pile and kitchen carpeting.
Notice that the nozzle of the cleaner is flush with the carpet. For rugs
of normal pile height, select the NORMAL position. If the cleaner is
difficult to push, move the lever to the HIGH position. Choose the
SHAG position for cleaning very long or shag pile carpet.
Note: When removing loose dirt from hard surface floors, adjust the
cleaner to the NORMAL position. The LOW setting on the cleaner
lowers the nozzle to the carpet for effective cleaning of LOW carpet.
However, be certain to change the rug position when cleaning normal
or shag pile carpet. If the LOW setting is used when cleaning normal
or shag pile carpet, there is an increase in the belt load and pushing
effort is greatly increased.
WARNING: ELECTRIC SHOCK COULD OCCUR IF USED
OUTDOORS OR ON WET SURFACES.
Loading ...
Loading ...
Loading ...