Loading ...
Loading ...
Loading ...
HOW TO ATTACH OUTER
JACKET TO CLEANER
Place the two projections at the
bottom of the
inside the wire
of the cleaner.
to the left and
opening. When
outer bag assembly
loops at the back
Pull the bag clip
fit bag against
you release the
bag clip, make sure that it fits
completely over the bag lock.
Attach the spring to the support
hook, which is located on the
handle.
HOW TO ATTACH TH ROW-
AWAY BAG TO CLEANER
Open the outer jacket and pull
out tube. Roll rubber bag re-
tainer down the tube toward
the cleaner. Slip the open end of
the throw-away bag onto tube and
push as far back as possible. (Be
sure to match arrow on throw-away
bag with the 0 mark on the tube.)
Unroll the rubber bag retainer so
it holds bag firmly in place.
Grasp the pleats on each side of
the throw-away bag at dotted line
and pull out until entire dotted
line is visible. Place throw-
away bag inside the outer jack-
et without folding and close
jacket.
After turning cleaner on, push
down on the handle until the
front of the cleaner is free
from the carpet. This insures
that the throw-away bag is
inflated.
Loading ...
Loading ...
Loading ...