Loading ...
Loading ...
Loading ...
4. Lift out rug agitator,
remove old belt and
place new belt in groove
of rug agitator.
5. Replace agitator. On
one end of the agitator
roll there is a raised
metal plate. Make sure
that this end is placed
in groove on side of
cleaner.
6. Place belt on pulley.
Side of belt nearest
cleaner should be in
line with arrow on
bottom of cleaner.
7. Replace metal plate.
Place metal knobs on
front end of plate in
wire holders. Check to
see that latches are
pushed back and will
not be covered by
plate. Place plate in
position and latch
securely.
11
Loading ...
Loading ...
Loading ...