Loading ...
Loading ...
Loading ...
2221
2. Press and hold the steam wand ❼,
pull out the steam wand ❼. Clean the
steam wand ❼ with wet sponge.
❹ to steam function icon . If the steam is weak, check whether
the hole of the steam wand ❼ is blocked. If it is not cleaned in
time, it will produce a bad smell. You can use a cleaning pin to
clean and unblock the steam pipeline.
1. A clean coffee maker is essential for making great-taste coffee.
Clean all the accessories each time and clean the coffee maker’s
water scale regularly as specified in the “REMOVING MINERAL
DEPOSITS” section.
2. Clean the seal ring of the filter holder ❺ each time immediat-
ely with hot water using the brewing function after making coffee.
3. Clean the steam wand ❼ each time immediately with hot steam
using the steam function after finish frothing milk.
Note: Do not use detergent or stainless steel scrubber/brush to
clean the portafilter ❽, because the surface of the portafilter ❽
is coated, and the detergent/brush will accelerate the oxidation
of the portafilter ❽ surface. Therefore, we recommend cleaning
the portafilter ❽ with just water and rag.
5.3.3 BREW ESPRESSO AFTER MILK FROTHING
5.3.4 AUTOMATICALLY POWER-OFF FUNCTION
CAUTION: Be sure to unplug this appliance before cleaning
and let the appliance cool down completely. To protect against
electrical shock, do not immerse cord, plug or unit in water or
liquid.
After making the milk foam through the steps above (5.3.1 THE STEPS
OF MAKING MILK FOAM), the machine will relieve the pressure auto-
matically, then you can continue to make espresso.
To make sure your coffee maker operate efficiently, internal pipe clean
and the peak flavor of coffee, it is necessary to clean the coffee maker’s
water scale periodically.
After brewing coffee or frothing milk, if there is no any operation within
15 minutes, the appliance will power off automatically.
6. CLEAN AND MAINTENANCE
6.1 DAILY TIPS FOR CLEANING AND MAINTENANCE
6.2 REMOVING MINERAL DEPOSITS
(1) We strongly recommend you to use the
citric acid (The rate of citric acid and water
is 1:100). To confirm descaling, fill the water
tank ⓰ with citric acid under the MAX level.
Loading ...
Loading ...
Loading ...