Loading ...
Loading ...
Loading ...
49-1000674 Rev. 2 9
Operation
USING THE COOLER: Operation
Key Button
Power: Press and hold the Power button for 3 seconds to Power unit on or off.
Power Mode: Press Power Mode button to switch between Quick mode and Eco mode.
Battery Protect: Press Battery Protect button to select Low, Middle or High level.
Light Mode: Press the Light Mode button to adjust the light’s setting to low, middle,
or high.
Temperature Adjust
Control Lock: Press Control Lock button for 3 seconds, to lock and unlock the control.
Zone Select: Press Zone Select button to select the right or left zone. In 75L models, the
corresponding LED will light up when a zone is selected. In 50L models, this
button is disabled and the LED indicator will be off.
Battery Protect
• When the power to the cooler is turned on, press the Battery Protect button to enter battery
protect mode. The panel will display the current setting.
• In selection mode, press the Battery Protect button to to cycle to the next setting option.
The panel will display LOW > MED > HIGH .
• Default setting is MED.
• The table below defines the voltage protection level and resume voltage in 12V and 24V input.
Power Mode
• Press Power Mode button to switch between Quick mode and Eco mode; the
corresponding icon will be be lit.
• Default setting is Eco mode.
Light
Mode
˚F ˚C
Eco
Quick
Locked
Zone
Select
Hold 3 Sec
Power
Hold 3 Sec
Battery
Protect
Low Med High
Power
Mode
Control
Lock
Low Med High
˚F ˚C
Eco
Quick
Locked
Power
Hold 3 Sec
Battery
Protect
Low Med High
Power
Mode
Hold 3 Sec
Control
Lock
Light
Mode
Low Med High
MED Level is the Default Setting
HIGH MED LOW
Start-up Cut-o Start-up Cut-o Start-up Cut-o
12V 12.4V 11.1V 11.7V 10.4V 10.9V 9.6V
24V 23.9V 22.9V 23.3V 22.3V 22.7V 21.3V
Protection
Level
Power
Sources
RIGHT ZONE
LEFT ZONE
(Compressor side)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
50L
75L
Loading ...
Loading ...
Loading ...