GE - General Electric PRV02ATTBB GE Profile Electric Cooler

User Manual - Page 3

For PRV02ATTBB.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
49-1000674 Rev. 2 3
WARNING
To reduce the risk of fire, explosion, electric shock, or injury when
using your cooler, follow these basic safety precautions:
This cooler must be properly installed and
located in accordance with the Installation
Instructions before it is used.
Unplug the cooler before making repairs or
cleaning.
NOTE: Power to the cooler cannot be
disconnected by any setting on the control
panel.
NOTE: Repairs must be performed by a
qualified Service Professional.
Replace all parts and panels before
operating.
Do not use an extension cord.
Keep flammable materials and vapors
away from the cooler.
Do not store explosive substances such as
aerosol cans with a flammable propellant in
this appliance.
To prevent suffocation and entrapment
hazards to children, remove the door
from any cooler before disposing of it or
discontinuing its use.
To avoid serious injury or death, children
should not stand on, or play in or with the
appliance.
Children and persons with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge can use
this appliance only if they are supervised or
have been given instructions on safe use
and understand the hazards involved.
This appliance is intended to be used in
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses;
by clients in hotels, motels, bed & breakfast
and other residential environments; catering
and similar non-retail applications.
The applications can be use for cooling and
deep-freezing food.
Do not apply harsh cleaners to the cooler.
Certain cleaners will damage plastic which
may cause parts such as the door or door
handles to detach unexpectedly. See the
Care and Cleaning section for detailed
instructions.
Do not operate the unit where the
temperature will go below 55°F(12.8°C) or
above 110°F(43.3°C) (see unit ON/OFF).
Ensure the cooler is not installed in a
location(Indoor/Outdoor) prone to water
stagnation.
Do not install the cooler in a location
exposed to water (rain, etc.,). Make sure to
place the cooler on a dry, protected surface
and away from edges.
Install it on a floor strong enough to
withstand 122 lbs.
Use only manufacturer supplied power
adapters when using the product.
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...