Loading ...
Loading ...
Loading ...
10 49-1000674 Rev. 2
Operation
USING THE COOLER: Operation
Temperature Control
• When a zone is selected, Press
˅
or
˄
button to increase or decrease the temperature
setting.
• The default temperature setting for 50L model is 5°C/41°F.
• The default temperature setting for 75L model is 5°C/41°F for RIGHT ZONE, -18°C/-0.0°F for
LEFT ZONE.
• Each time the
˅
or
˄
is pressed, the temperature setting will change 1°C/°F.
• To display the cooler’s current temperature, press and hold the
˅
and
˄
button
simultaneously for 3 seconds. While the temperature display is flashing, press the
˅
and
˅
button to switch the temperature display to F or C. If no key is pressed for 5 seconds, the
temperature setting display will stop flashing and display the current temperature.
• The Temperature range setting from -6°F ~ 68°F. (-21°C~+20°C).
Light Mode
• Press Light mode button to activate and enter light setting mode.
• Light mode: toggle through High, Mid and Low.
• Default is High.
• Low: All LEDs and panel will light at Low brightness, light board LED will be turned off. After
5 seconds goes to SLEEP mode all LEDs will be turned off except Power button LED until
any button betouched again.
• Mid: All LEDs and panels will light at high brightness, and the light board LED will light at low
brightness. After 20 seconds, the display goes into SLEEP mode, and all LED displays will
light at low brightness until any button is pressed
• High: All LEDs and panels, including the light board LED, will light at high brightness.
Control Lock
• Press and hold Control Lock button for 3 seconds to lock or unlock the control. When the
control lock is activated, all buttons are disabled.
• Once the Control Lock is selected, press any button, the Control Lock indicator LED will
flash to indicate the control is locked.
• When the power is turned off or if there is a sudden loss of power, the control lock function
will retain its previous setting when power is restored.
USB Output Charges
• The DC cooler has 3 USB ports for charging other products.
• USB port can provide total max 5V/3A,15W output.
Door switch and Light
• The sensor on the light board detects whether the door is open or closed and will turn the
light on or off.
Loading ...
Loading ...
Loading ...