Loading ...
Loading ...
Loading ...
14
Rubber Washers
Must Be Present
USE ONLY
NEW HOSES
Leveling the washer
Connecting the water
1. Run some water
from the hot and
cold faucets to flush
the water lines and
remove particles that
might clog the water
valve screens and to
determine which faucet
is hot and which is cold
supply.
2. Check to ensure
that the inlet hoses
have the rubber
washer firmly in
place.
INSTALLATION
3. Connect the HOT
inlet hose (color:
red) to the HOT
inlet connection
on the washer and
the COLD inlet
hose to the COLD
inlet connection
(color: blue) on the
washer.
Excessive noise and vibration can be
prevented by properly leveling the washer.
1. For free standing
installation and
with the washer
within 4 feet
(1 m) of its final
location, place a
level on top of the
washer.
2. Use an adjustable
wrench to adjust
the leveling legs so
the washer is level
front-to-rear and
side-to-side, and
stable corner-to-
corner.
3. Press down on
alternate corners
and sides and feel
for the slightest
movement. Adjust
the appropriate
leg(s) so the
washer sits solidly on the floor on
ALL four legs. Keep the leveling leg
extension at a minimum for best
performance of the washer.
5. Connect the HOT
inlet hose to the HOT
water supply and
the COLD inlet hose
to the COLD water
supply.
Cold Hot
Cold inlet shown on
left side (400, 500,
600 models only).
On 300 series, the
cold inlet is on the
right side.
4. Tighten by hand
until snug. Then
tighten each supply
connection another
2/3 turn with pliers.
Do not cross thread
or over-tighten these connections.
IMPORTANT
The cold water inlet will have a blue cap
cover on the inlet connection and the
hot water inlet will have a red cap cover
on the inlet connection. Additionally,
depending on the model, the hot and
cold inlet connections will be marked
with either an adhesive label or markings
directly on the unit to indicate which side
is cold and which side is hot.
NOTE
For pedestal installations, see additional
installation instructions included with the
pedestal.
NOTE
Hoses are not included with washer
purchase.
Loading ...
Loading ...
Loading ...