Loading ...
Loading ...
Loading ...
e
Page 7
f
Other features
Auto Defrost
When frost builds up on the evaporator coils, the
compressor will cycle off and the fan will continue to
run until the frost disappears.
Note: When Auto defrosting operation, the unit may
make a voice of refrigerant flowing, it is normal.
Auto Shut Off
The dehumidifier shuts off when the bucket is full.
For some models, the fan motor will continue to run
for 30 seconds.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be restart
operation in the first 3 minutes.This is to protect the
unit. Operation will automatically start after 3 minutes.
Operating
Instructions
Operating
Instructions
dehumidification, please first
dehydrate the wet clothes.
3. Make sure to direct airflow
at the wet clothes.
4. For thick and heavy wet
clothes may not get the best
effective dehumidification.
Dryer mode (On some models)
The unit can make the MAX dehumidification function
when it is under Dryer mode. The fan speed can’t be
adjusted.
Note:
1.The Dryer/MAX (model dependent) mode must
be operated in a close room,do not open the door
and window.
2.To make the best effective
30~50cm
Wet clothes
30~50cm
Airflow
Allow 30~50cm
of distance on the
top and right side
of the unit to the
wet clothes.
Auto-Restart
If the unit breaks off unexpectedly due to the power
cut, it will restart with the previous function setting
automatically when the power resumes.
Continuous dehumidifying mode
At continuous dehumidifying mode, the unit dehumidify
continuously and cannot select humidity. Press mode
button to exit continuous dehumidifying mode.
Smart dehumidifying mode (On some models)
At smart dehumidifying mode, the unit will
automatically control room humidity in a comfortable
range 45%~55% according to the room temperature.
The humidity setting function will be invalid.
Note: When one of the above malfunctions occurs,
turn off the unit, and check for any obstructions.
Restart the unit, if the malfunction is still present, turn
off the unit and unplug the power cord. Contact the
manufacturer or its service agents or a similar qualified
person for service.
Protection Code:
P2-Bucket is full -- Empty the bucket and replace it in
the right position.
Eb-Bucket malfunction--Replace the bucket in the right
position, the malfunction clear.
Setting dehumidifying mode
At setting dehumidifying mode, the unit can be adjusted in a
range 35%~85%, and the humidity setting can be adjusted
(increase/decreasing) in 5%. Press MODE button to exit
setting dehumidifying mode.
Quick glance light (On some models)
When the humidity is more than 70%, the quick
glance light will emit red light.
When the humidity range is at 45% to 70%, the
quick glance light will emit yellow light.
When the humidity is lower than 45%, the quick
glance light will emit green light.
The light can be activated or deactivated by pressing
and holding the Fan button and UP button
simultaneously for 2 seconds.
MAX mode (On some models)
The unit can make the MAX dehumidification function
when it is under MAX mode. The fan speed is fixed at
high fan speed.
Loading ...
Loading ...
Loading ...