Loading ...
Loading ...
Loading ...
Operating
Instructions
e
Page 10
f
· Water can be automatically emptied into a floor drain
or a suitable drainage facility by attaching the pump
drain outlet with a pump drain hose()od=1
/
4
,
supplied).
3. Pump draining (on some models)
· select the desired humidity setting and fan speed on
the unit for pump draining to start.
Note: The pump operation on light blinks at 1Hz when
the pump is operational failure. Please turn off the unit
and plug the power cord out. Check the following
things:
·
Cleaning the filter of the pump hose.
· Check that the pump drain hose does not link or back.
·
Empty the water of the bucket.
· Reinstall the pump hose if it drops and reinstall the
bucket properly. Turn on the unit. If the error repeats,
call for service.
Note: Do not use this operation when the outdoor
temperature is equal to or less than 0 C (32 F),
o
o
otherwise water is become ice that will cause the
water hose blocked up and the unit failure. Make
sure to empty the bucket once a week when using
the pump draining feature. When the pump draining
feature is not being used, remove the pump drain
hose from the outlet.
· Press the pump drain hose outlet in and take the
pump drain hose out from it. Take the pump hose
out from the unit.Make sure do not let the water in
the pump hose drip to the floor.
pump intake
pump outlet
pump drain hose
filter of pump hose
pump hose
· Install the pump hose into the pump hose intake of
the unit, and rotate it.
· Install the pump drain hose into the pump drain
hose outlet for depth of 15mm at least, then lead
the water hose to the floor drain or a suitable
drainage facility.
· Put the dehumidifier on the bucket again.
·
Press and hold on the Up/Down buttons for 2 second
to initiate PUMP feature
. When the PUMP is activated,
the bucket capacity is at the 4th fill level and cannot
be selected. The PUMP works only if the bucket is full
of water at the 4th fill level.
Note: The pump may cause big noise when it starts to
work for 3~5 minutes. It is a normal phenomenon.
· Make sure the hose is secure so there are no leaks.
· Direct the hose toward the drain, making sure that
there are no kinks that will stop the water flowing.
· Place the end of the hose into the drain and make
sure the end of the hose is level or down to let the
water flow smoothly. Do never let it up.
Loading ...
Loading ...
Loading ...