Loading ...
Loading ...
Loading ...
18 | nuwavenow.com
BASIC FUNCTIONS
With its numerous Cooking Presets and fea-
tures, the Pro-Smart Oven’s suite of Basic
Functions oers you all you need to make
delicious, healthy meals quickly and easily.
Time and
Temperature
You should, of course, set the cooking time
and temperature before cooking, but you
can always adjust them while you are cook-
ing as well.
To Set the Cooking Temperature and
Time Before Cooking:
1. Press the Power button. The screen
will show a cooking function, the
cooking temperature, the cooking count
down time (i.e., “00:15”), and “Pre-
heat” (if active). The “:” will also be lit.
2. Press Temp. Turn the Select dial to
adjust the cooking temperature.
3. Press Time. Turn the Select dial to
adjust the cooking time.
4. Press START/PAUSE to begin cooking
at the set temperature and time.
5. When nished, the screen will show
“END” and the Pro-Smart Oven will
beep 3 times.
To Adjust the Cooking Temperature and
Time While Cooking:
1. Press Temp. Use the Select dial to
adjust the cooking temperature.
2. Press Time. Use the Select dial to
adjust the cooking time.
3. The Pro-Smart Oven will now cook at
the new temperature and time.
4. When nished, the screen will show
“END” and Oven will beep 3 times.
The Todd English Pro-Smart Oven has three
heat sources, Top, Bottom, and Rear. The
Rear heater is part of the large rear fan
assembly.
The default heat settings are, in order:
80% (rear) / 10% (top) / 10% (bottom). All 3
heaters combined will always equal 100%.
To adjust these settings:
1. Press Heat/FAN for the defaults to ap-
pear. Continue to press HEAT/FAN until
the heater you wish to change appears
on the LED display.
2. Turn the Select dial to adjust the power
for the selected heater from 0–100%, in
5% increments.
3. Once all adjustments are made, press
START/PAUSE to begin.
The default fan setting is 3. To adjust that:
1. Press and hold Heat/FAN until the fan
speed ashes.
2. Turn the Select dial to adjust the fan
speed from 3 to OFF.
3. Press the Select dial to lock in the
change.
Notes
• Changing the power of one heater will
automatically adjust one or both of the
others, so they always total 100%.
• When the dierence is only ±5%:
• Rear Heater: The dierence is
applied to the bottom heater.
• Top Heater: The dierence is ap-
plied to the rear heater.
• Bottom Heater: The dierence is
applied to the rear heater.
• Whenever the percentage is 10% or
more, the dierence is split between the
2 remaining heaters.
• The fan can only be turned o if the
rear heater is o.
Heat and Fan
Loading ...
Loading ...
Loading ...