Loading ...
Loading ...
Loading ...
Fig. 12
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Carefully remove the protective cover.
Fig. 12 (1)
u
Undo the bolt a little with a T15 screwdriver.
Fig. 12 (2)
u
Hold the door and remove the bolts with your fingers.
Fig. 12 (3)
u
Pull the bearing bush out of the guide. Insert from the other
side and click into place.
Fig. 12 (4)
u
Lift the door and set it aside.
u
Carefully lift the plugs out of the door bearing bush with a
slotted screwdriver and remove.
Fig. 12 (5)
4.3.3 Moving the upper bearing parts to the
other side
Fig. 13
u
Remove both screws with the T25 screwdriver.
u
Lift and remove the bearing bracket.
Fig. 14
u
Release the cover and remove from the side.
Fig. 14 (1)
u
Rotate the cover 180° and clip onto the other side from the
right.
Fig. 14 (2)
u
Click the cover into place.
Fig. 14 (3)
u
Position the screw with a T25 screwdriver.
Fig. 14 (4)
u
Position the upper bearing bracket.
Fig. 14 (5)
w
Place the pins in the provided screw holes.
u
Tighten the screw.
Fig. 14 (4)
u
Insert the screw with a T25 screwdriver and tighten.
Fig. 14 (6)
Putting into operation
* Depending on model and options 9
Loading ...
Loading ...
Loading ...