Loading ...
Loading ...
Loading ...
Fault
Suds coming out of the
detergent dispenser.
Repeatedspinning.
The laundry was not
spun.
Program duration ex-
tended.
Unsatisfactorywashing
result.
Detergent residue on the
laundry.
Gray residue on the laun-
dry.
Systemshakesor shudders
whenpassingfrom lowerto
higherspeedspinning.
Possible cause
Too much soap or non-HE soap used, pump could
not remove suds.
This is not a fault.
The imbalance compensationsystem is attempting to
balance the loadthrough repeated spins.
Large items of clothing have become entangled and
could not be distributed evenly inthe drum. For safe-
ty reasonsthe high-speed spin cycle was automati-
cally suppressed.
This is not a fault.
The suds detection feature has activatedan addi-
tional rinsing cycle to reducethe amount of suds.
This is not a fault.
The imbalance compensationsystem is attempting to
balance the loadthrough repeated spins.
The degreeof soiling was higher than estimated.
Not enough detergent.
Some phosphate-free detergents contain water-insol-
uble residuesthat may appear as light spots on the
laundry.
Dirt accumulationfrom ointments, fats or oils.
Drumsystemsuspensioncan shift duringspeedup, this
is nota failure.
Action
Mix 1 tablespoonof fabric softener with 1 pt (IA litre)
of water and pour into detergentdispenser III.
Use lessdetergent for future wash loads. Detergents
specifically designedfor you High Efficientcywasher
produce fewer suds and will include the letters "HE"
on the packaging.
Always loadthe drum with large and small items
together.
Always loadthe drum with large and small items
together.
Add a more appropriateamount of detergent.
Always loadthe drum with large and small items
together.
Select suitable program
or
Heavy duty as an additional option.
Add detergent accordingto the manufacturer's
specifications.
Brush off spots when laundry is dry.
Add the maximum amount of detergent and select
the highest permissible temperature.
Mixsmallandlargelaundrypiecesin loadto minimize
thiseffect.
Ifthe fault cannot be eliminated with the aid of the above table, switch the appliance off, wait 5 seconds, switch the appliance on
again, select and start the program.
Ifthe fault continues, call customer service; see Page 25.
24
Loading ...
Loading ...
Loading ...