Loading ...
Loading ...
Loading ...
Special features
Auto Load adjust
"Auto Load adjust" adjusts the water
and energy consumption for each
program and determines the amount of
laundry and type of fabrics.
This process is built into your machine
and occurs automatically.
This control reduces water and energy
consumption when washing small
loads.
Unbalanced load detection system
The automatic unbalanced load
detection system spins the laundry
several times to ensure even
distribution.
Ifthe wash load is unevenly distributed,
it will not spin (for safety reasons) or the
final spin speed is reduced.
Displayed Time
Due to these and other characteristics
of the controls the actual cycle time will
vary.
When a program has been selected,
the expected program duration is
displayed.
The following will effect the displayed
time:
- Load size
- Repeated spin attempts to evenly
distributed load
- Additional rinse cycles if excessive
foam occurs
- Water pressure is too low
- Selection of additional options,
e.g. "Rinse plus"
[_You may notice these effects
(more or less time) changes the
displayed time when they occur in
the cycle. If no options are
selected and these effects do not
occur, the time indicated will count
down until the end of the cycle.
Washing
CI Turn on the water taps.
Spin
CI Turn the program selector to the
desired program.
CI
Load the washing machine and
close the door.
The Start/Pause indicator light
flashes (red).
Start Bleach RinseHeavy
Pause
@
o..°.a
CI If necessary, press the button(s) for
additional option(s).
The indicator light of the selected
button is lit (red).
D If an incorrect combination was
inadvertently selected, the
indicator light of the selected
button is turned off.
F_s/_s
x
Max spin
• Reduced spin
Gentle spin
O No final spin
®G
st t
Start r Ready in
@ Finis//e_
@ Spir
@Rnse
@ Was
@ Ooo ocked
Cl
i_ i
If necessary, change the spin
speed with the Spin selection
button until the the desired spin
speed indicator light is lit.
IW_xsp_
@ Feduced sp
@ @xnie spl_
@ I/o lna
Cl
iiikioi?
®
k ii
IIII I Ii}f }
If necessary, change the Start
time. Press the Delay Start button
until the desired Start time is
displayed.
i
Max spin I
Reduced spin
Gentle spin Startin Readyin I
• . [
O No final spin O Finished
OSpin
ORmse i
OWash i
Spin Delay @ DooriOcked
selecuonstart i
E3 Press the Start/Pause button.
The indicator light is lit (red).
Display shows the run time of the
selected program. The program
starts.
D Each program step is indicated by
the indicator lights under the
display.
19
Loading ...
Loading ...
Loading ...