Loading ...
Loading ...
Loading ...
STEP 6
Attach the wheels by first placing the wheel
spacers (K x 2) onto the front and rear axles.
SRDH0716
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K.
www.drapertools.com e-mail: [email protected]
5
NOTE. The cross brace with the two
holes farthest apart is the rear of the
cart.
Attach the rear axle sub-assembly (J) to
the side rails of the bed (A) using M8 x 20
carriage bolts (J x 2), M8 washers (C x 2)
and M8 lock nuts (D x 2). Slide each rear
strut (K) over the axles of the rear axle
sub-assembly (F). The strut with a bend
to the right fits to the left side axle and
vise versa for the other strut. Fit one M8
x 25 carriage bolt (P x 1), one M8 washer
(C x 1) and one M8 lock nut (D x 1) to the
other end of each front strut (H). The bolt
head must be on the underside of the
strut. Push the head of the bolt though
the hole in the cross brace of the bed and
slide side ways so the square under the
head of the bolt fits into the slot of the
cross brace. Keep upward pressure on the
strut and tighten the nut. Repeat for the
other strut. Once the struts have been
secured to the cross brace tighten the
two remaining nuts and bolts.
STEP 5
Loading ...
Loading ...
Loading ...