Loading ...
Loading ...
Loading ...
11
CAUTION
Drawer is heavy. Use caution when
lifting.
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and
cause personal injury, or damage to the
doors or handles.
Once both doors are in place, ensure
they are aligned with each other and level
(please see the “Installation” section for
more details), and replace the top hinge
cover.
To remove the refrigerator doors:
1 Trace lightly around the door’s top
hinges with a pencil. This makes
reinstallation easier.
2 Disconnect the harness by grasping
both sides of the connector firmly,
depress the latch, and pull apart.
Remove the two screws from the top
hinge. Lift the door off of the bottom
hinge and set it aside.
Lower Hinge Removal
3 Unscrew the three lower hinge
screws and hinge if necessary.
Removing the Doors
Getting through narrow
spaces
If your refrigerator will not fit through an
entrance area, you can remove the doors.
Check first by measuring the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord
is unplugged from the wall outlet.
2 Open the freezer drawer and remove
the toe grille (see “Installation” section).
3 Remove any food from the door
shelves and close the doors.
To reinstall the right door, reverse the
above steps.
Rear
Cover
Screw
Ground
Screw
Top
Hinge
Top Hinge
Cover
Hinge
Screws
Multi-wire
Cables
Leave
Hinge
With
Door
Front
Cover Screw
Loading ...
Loading ...
Loading ...