Loading ...
Loading ...
Loading ...
Fundamental safety instructions
6
2.2 Organizational measures
The operating and assembly instructions must always
be at hand at the place of use of the machine.
In addition to the operating and assembly instructions,
observe and instruct the user in all other generally ap-
plicable legal and other mandatory regulations relevant
to accident prevention and environmental protection.
These compulsory regulations may also deal with
the handling of hazardous substances, issuing and/or
wearing of personal protective equipment, or trafc
regulations.
The operating and assembly instructions must be sup-
plemented by instructions covering the duties involved
in supervising and notifying special organizational
features, such as job organization, working sequences
or the personnel entrusted with the work.
Personnel entrusted with work on the machine must
have read the operating instructions and in particular
the chapter on safety before beginning work. Reading
the instructions after work has begun is too late. This
applies especially to persons working only occasionally
on the machine, e.g. during setting up or maintenance.
Check - at least from time to time - whether the per-
sonnel is carrying out the work in compliance with the
operating instructions and paying attention to risks
and safety factors.
For reasons of safety, long hair must be tied back or
otherwise secured, garments must be close-tting and
no jewellery may be worn, including rings. Injury may
result from being caught up in the machinery or from
rings catching on moving parts.
Use protective equipment wherever required by the
circumstances or by law.
Observe all safety instructions and warnings attached
to the machine.
Make sure that safety instructions and warnings
attached to the machine are always complete and
perfectly legible.
In the event of safety-relevant modications or changes
in the behaviour of the machine during operation, stop
the machine immediately and report the malfunction
to the relevant specialized dealer.
Never make any modifications, additions or con-
versions which might affect safety without the
manufacturer’s approval. This also applies to the in-
stallation and adjustment of safety devices and valves
as well as to welding work on load-bearing elements.
Only use original spare parts from the manufacturer.
These meet technical requirements and include war-
ranty and guarantee claims. Adhere to prescribed inter-
vals or those specied in the operating and assembly
instructions for routine checks and inspections.
For the execution of maintenance work, tools and
workshop equipment adapted to the task on hand are
absolutely indispensable.
The personnel must be familiar with the location and
operation of re extinguishers.
Observe all re-warning and re-ghting procedures.
2.1 Designated use of the machine
The product has been built in accordance with state-
of-the-art standards and the recognized safety rules.
Nevertheless, its use may constitute a risk to life and
limb to the user or third parties, or cause damage to
the product and other material property.
The product must only be assembled in technically
perfect condition in accordance with its designated
use and the instructions set out in the operating and as-
sembly manual, and only by safety-conscious persons
who are fully aware of the risks involved in operating
the machine. Any functional disorders, especially
those affecting safety, should therefore be rectied
immediately.
The product is designed exclusively for tting to
machines approved by the manufacturer and for ac-
cessories approved by the manufacturer. Using the
machine for purposes other than those mentioned
above is considered contrary to its designated use.
The manufacturer/supplier cannot be held liable for
any damage resulting from such use. The risk of such
misuse lies entirely with the user.
Operating the machine within the limits of its designa-
ted use also involves observing the instructions set out
in the operating and assembly manual and complying
with the inspection and maintenance directives.
2 Fundamental safety instructions
Loading ...
Loading ...
Loading ...