Loading ...
Loading ...
Loading ...
7.5 Adjusting the height of the skids
Commissioning
17
2) Remove folding pin.
3) Pull skid downwards and remove.
4) The height setting of the skids is adjusted by repo-
sitioning the shims.
1) Raise the shovel blade slightly and place two woo-
den blocks under the blade.
DANGER
Switch off the engine. Secure the tractor mower to prevent it moving and take precautions to ensure
it cannot be started inadvertently.
5) When the skid height has been adjusted, the skid is
slid upwards through the guides and secured using
the folding pin. Repeat the procedure for the left-
hand skid.
Read the operating instructions supplied by the tractor mower manufacturer.
6) Raise the shovel blade slightly and remove the
wooden blocks. The gap between the ground and
the rubber strip should be 2 - 3 mm.
WARNING
Do not stand in the vicinity of a raised, unsecured shovel blade. When not in use, the shovel
blade must be in the fully lowered position.
Loading ...
Loading ...
Loading ...