Loading ...
Loading ...
Loading ...
7.1 Fundamental safety instructions for standard operation
7 Commissioning
Commissioning
13
WARNING
Observe maximum speed of 5 km/h!
Avoid any operational mode that may be prejudicial
to safety.
Before beginning work, familiarize yourself with the
location of installation and circumstances of the site.
This includes obstacles in the working and travelling
area, the earth load capacity and any barriers separating
the location of installation from public roads.
Take the necessary precautions to ensure that the
machine is used only when in a safe and reliable state.
Operate the machine only if all protective and safety-
oriented devices, such as removable safety devices,
sound-proong elements and exhausters, are in place
and fully functional.
Check the machine for obvious damage and faults each
time you use it. Report any changes (incl. changes in
the machine’s working behaviour) to a specialized
dealer. If necessary, stop the machine immediately
and lock it.
In the event of malfunctions, stop the machine im-
mediately and lock it. Have any defects rectified
immediately.
Start the machine from the driver’s seat only.
During start-up and shut-down procedures always
watch the indicators in accordance with the operating
and assembly instructions.
Before starting up or setting the machine in motion,
make sure that nobody is at risk.
Before starting work or travelling with the machine,
check that the braking, steering, signalling and lighting
systems are fully functional.
Before setting the machine in motion always check that
the accessories have been safely stowed away.
When driving on public roads, pathways or open
spaces, observe the applicable trafc regulations and,
if appropriate, make the necessary adjustments to the
machine to ensure it meets the legal requirements.
In conditions of poor visibility and after dark always
ensure that there is sufcient lighting.
Always keep at a distance from the edges of building
pits and slopes.
Avoid any operation that might be a risk to machine
stability.
Never travel across slopes; always keep the working
equipment and the load close to the ground, especially
when travelling downhill.
On sloping terrain always adapt your travelling speed
to the prevailing ground conditions. Never change to
a lower gear on a slope but always before reaching it.
Before leaving the driver’s seat always secure the
machine against inadvertent movement and unautho-
rized use.
Loading ...
Loading ...
Loading ...