Santos SHOP COFFEE GRINDER WITH BAG HOLDER 04 Shop coffee grinders

User Manual - Page 7

For SHOP COFFEE GRINDER WITH BAG HOLDER 04.

PDF File Manual, 23 pages, Read Online | Download pdf file

SHOP COFFEE GRINDER WITH BAG HOLDER 04 photo
Loading ...
Loading ...
Loading ...
SANTOS : User and maintenance manual
98101 EN 3.8 - 04 2022 7 / 23 www.santos.fr
IMPORTANT: It is prohibited to use spare parts other than those certified
made by SANTOS
For all spare part orders (see references in the exploded view at the end of the manual),
state:
the type,
the machine serial number and
the electrical specifications ()
recorded under the machine.
Prolonged periods of non-use:
There are no problems with this appliance in the event of prolonged periods of non-use.
You are simply advised to clean it before use and check that the components of the
appliance are in good condition (e.g. power cord, seals and other spare parts).
Replacing the grindstones:
IMPORTANT: always change both 2 grindstones (17) at the same
time. (use SANTOS reference 00001B)
The 2 grinding wheels are identical and can be fitted equally either on the moving plate
(18) (moving grinding wheel) or on the cast metal adjustment block (19) (fixed grinding
wheel).
1. Stop the machine by putting the switch (13) to "0" and disconnect the power supply
cord.
2. Close the shutter (3) on the bean hopper (2). Take off the bean hopper (2).
3. Turn the grinding wheel gap adjuster button (6) clockwise until it comes to a halt at
the “COARSE” setting."
4. Unscrew the nuts (16) and remove the whole grinding unit (15), to gain access to the
grinding wheels.
5. Change the grinding wheels (3 fastening screws) after carefully cleaning the
supporting surfaces.
TAKE CARE: The slightest small coffee particle under the grinding wheel may
prevent the machine from operating correctly. It is recommended that the grinder
body is cleaned with a compressed air jet or a dry brush.
6. Reassemble the grinding unit (15) and adjust the grinding gap to its minimum setting.
TAKE CARE
Before tightening the fastening nuts (16) on the grinding unit (15), check that the dial
(4) of the grinding wheel adjuster button (6) is set to COARSE”"
This precaution is essential to prevent any risk of the grinding wheels being brought
!
!
!
Loading ...
Loading ...
Loading ...