Loading ...
Loading ...
Loading ...
SANTOS : User and maintenance manual
98101 EN 3.8 - 04 2022 5 / 23 www.santos.fr
ELECTRICAL CONNECTION
• The electric power supply for the machine is available in 3 single-phase voltages:
- 110-120 V 50/60 Hz:
- 220-240 V 50 Hz:
- 220-240 V 60 Hz:
Note: This appliance can operate at both 50Hz and 60Hz without any adjustments.
Line protection: the machine should be connected to a standard 2-pole + earth electric
socket. The system should be fitted with an RCD and a fuse rated at 16A. The appliance
must be earthed.
CARE:
• Before connecting the machine, check that the mains electrical voltage is the same
as the voltage for your appliance. Its value is shown:
➢ either on the identification plate under the machine.
➢ or on the identification plate on the last page of this manual.
• If the power cable is damaged, it should be replaced by a special assembly available
from approved SANTOS dealers or from SANTOS.
CARE: Check that the On / Off switch (13) is in the 0 position before
connecting the power cable plug to your mains electric
power socket (fig. A).
RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE
This equipment is marked with the selective sorting symbol relating to
wastes from electrical and electronic equipment. It signifies that this product
should be taken over by a selective collection system conforming to the
Guideline 2012/19/EU (WEEE) – part Professional Equipment – so that it
can be either recycled or dismantled in order to reduce any impact on the
environment.
For more information, please contact your Retailer or the SANTOS.
For eliminating or recycling components of equipment, please contact a specialized
company or contact SANTOS.
The electronic products not undergoing a selective sorting are potentially dangerous for
the environment.
The damaging materials should be eliminated or recycled according to the regulations in
force.
!
!
Loading ...
Loading ...
Loading ...