Loading ...
Loading ...
Loading ...
Installation
55
EN
After laying the adhesive seal (A) on the
glass surface and after positioning and
securing the hob, fill the edges with
insulating silicone (B) and wipe away any
excess.
In the event the hob needs to be removed,
cut the silicone using a cutter before
attempting to remove it (C).
Spring clips
To ensure the hob is fixed and centred as
accurately as possible, the clips provided
must be positioned as described below:
1. Fit the clips by gently pressing them
horizontally into the appropriate space.
2. Then turn them upwards to fix them in
place.
Fixing brackets
• Screw the mounting brackets into the
holes on the sides of the bottom casing to
fasten the hob correctly to the structure.
If tightened too much the glass
may be strained and crack.
Loading ...
Loading ...
Loading ...