Loading ...
Loading ...
Loading ...
5
EN
Assembling the attachments
1. Assembling the large multi knife/
chopping blade: Place the large
processing bowl (E) onto the motor
base(A)aspreviouslydescribed.Fit
the large multi knife/chopping blade
(O),bypressingitrmlyintoplaceon
the drive shaft.
Caution! The blades are very sharp!
4. Assembling the small processing
bowl and small multi knife/chopping
blade: Place the small processing
bowl (Q) within the large processing
bowl (E). If the small processing bowl
isnotttedcorrectly,itisnotpossible
to close the bowl lid (F). Fit the small
multiknife/choppingblade(P)by
pressingitrmlyintoplace.
2. Assembling the discs or dough
blade: Fitthespindle(N),bypressing
itrmlyintoplaceonthedriveshaft.
Selectthedesireddisc.Carefullyt
thediscbypressingitrmlyinto
place on the spindle.
Note: The dough blade (I) and whisk
disc (J) must be assembled rmly with
the spindle before pressing it into place
on the drive shaft. All attachments must
be rmly attached/correctly tted to the
spindle.
5. When processing is complete,
remove the attachment and spindle
(N) from the processing bowl before
removing the processed food.
1.
Switch the appliance o, remove the
plug from the mains socket and wait until
theappliancestopscompletely.Wipethe
motor base (A) with a damp cloth.
Warning! Never immerse the
motorbase,plug,andcordinwateror
anyotheruid.
Washallparts,except for the motor
base(A)inwarmsoapywater.Dry
eachpartthoroughlybeforeuse.
All parts, except for the
motor base (A) and whisk disc
(J), are dishwasher safe. If using the
dishwasher, place parts only on the top
rack of the dishwasher.
Cleaning and Care
(O)
(N)
(N)
(I)
(M)
(P)
(Q)
(E)
(A)
(J)
(K)
3a. The reversible shredding disc (L)
can achieved both thick and thin
grating. Toachievethickgrating
results,placethediscwiththelarge
gratingholesfacingupwards.To
achievethingratingresults,carefully
turn over the disc.
3b. The adjustable slicing disc (M) slices
ingredient to a consistent thickness
from 0.15cm (ne) to 0.75cm (thick)
via 28 adjustable settings. To
increase the thickness turn the lever
on the disc shaft clockwise and to
decrease the thickness anti-clockwise.
(3a)
(3b)
Loading ...
Loading ...
Loading ...