Loading ...
Loading ...
Loading ...
7
• Allow the kettle to cool down fully.
• Wipe over the outside of the kettle and base with a damp cloth. A mild dishwashing
detergent may be used if required.
• Keep all connectors and sockets dry.
• Do not immerse the kettle or base in liquid.
• Do not use alkaline cleaning agents or harsh abrasives when cleaning this appliance.
• Clean the inside of the kettle using the instructions in the “DE-SCALE REGULARLY” section.
THE SUPPRESSOR
• The Suppressor is designed to reduce the noise made by the boiling water.
• If you allow scale to build up it will not be able to work properly and the kettle will become noisier.
DE-SCALE REGULARLY – EVEN IN SOFT WATER AREAS
Water contains minerals that will form deposits on the inside of your kettle, commonly referred
to as scaling. Scaling discolours the internal surfaces and can affect the performance.
To maintain the performance of your kettle, it should be de-scaled every three months or so.
De-scale more frequently if you live in a hard water area.
• Add 2 to 3 teaspoons of citric acid to the empty kettle.
• Fill the kettle with fresh cold water to the max level mark on the water gauge.
• Switch the ON/OFF switch to ON and allow the kettle to boil.
• Once the water has boiled allow the kettle to cool.
• Once the kettle has cooled, discard the water into the sink.
NOTE: If using a commercial de-scaler, follow the instructions listed on the de-scaler.
RINSE AFTER DE-SCALING
• Fill the kettle with fresh cold water to the max level mark on the water gauge.
• Discard the water into the sink.
• Repeat the rinsing process 3 times, discarding the water in the kettle each time.
NOTE: Products returned under warranty with faults due to scale may be subject to a
repair charge.
WATER FILTER
Scale particles suspended in the water may give it a cloudy or greasy appearance. The lter will
prevent these particles going into your drink. Remove and clean the lter as required.
CLEANING THE FILTER
• Check your hands are free from soap, hand cream, or anything which may leave a taint.
• Switch the power off and remove the plug from the wall power outlet.
Loading ...
Loading ...
Loading ...