Loading ...
Loading ...
Loading ...
5
POSITIONING
• Place the base on a stable, level surface.
• Route the cord so it does not overhang, and cannot be caught or tripped over.
• Wind excess cord beneath the base.
FILLING
Caution: If the kettle has just boiled it will be full of steam. Keep hands clear as steam
will escape from the kettle when opening the lid.
• Remove the kettle from the base.
• Press the lid lock button to open the lid.
• Fill the kettle above the ‘min’ line.
• Do not ll above the ‘max’ line. If overlled, the kettle may spit boiling water.
• Close the lid, and press down to lock it.
• Check the lid is fully closed or the kettle may not switch off when it boils.
VARIABLE TEMPERATURE AND THE LIGHT RING
The Colour Control Kettle has been designed with four pre-programmed temperature settings,
ideally suited to different types of beverages. These are represented in a unique way with the
Colour Control light ring that illuminates and changes colour according to water temperature:
NOTE: The light ring will change colour both as the water heats and then cools.
Temperature setting Colour
70°C Blue
80°C Green
90°C Purple
100°C Red
NOTE: See ‘Optimum Temperatures for Teas and Coffees’ for recommended brewing
temperatures and times for different beverages.
SWITCHING ON
CAUTION: Keep clear, as steam will escape from the spout when boiling.
• Plug the power cord into the wall power outlet and switch it on. The temperature control
buttons will ash.
• Place the kettle on the base – take care not to spill any water.
• Select the desired temperature by pressing the appropriate temperature control button.
The light on the button will illuminate.
• As the kettle boils, the light ring will ash and change colour according to the temperature
Loading ...
Loading ...
Loading ...