Loading ...
Loading ...
Loading ...
9.) Program Monitor Lights
Program flow can be monitored via program monitor lights on
control panel.
• Wash
• Dry
• End
10.) Remaining Time Indicator
Remaining Time Indicator displays the program time and the
remaining time the program will be operating
. In addition, you can
adjust program delay time by pressing the buttons on the
indicator before program starts. If you want to change delay time,
you can set the time by pressing Start/Pause button and using
buttons on the indicator. Press Start/Pause button again in order
to activate.
Child Lock Operation
In order to activate child lock, press “+” and “–” buttons on
Remaining time indicator simultaneously for 3 seconds. At this
time, "CL" appears for 2 seconds on remaining time indicator. To
deactive the child lock, press “+” and “–” buttons again
simultaneously for 3 seconds. "CL" will blink once
.
.) Start/Pause Button
Once you press the Start/Pause button, the programme you
selected w th the programme selector button w ll start runn ng and
the status indicator lamp “wash” will light up. In the stop
condition while wash led light is On, Start/Pause led will blink.
8.)
Rinse $id Lack Warning ,ndicator
In order to check that there is sufficient rinse aid in your machine
check rinse aid lack warning light on the d
isplay.When rinse aid
warning light starts coming on, fill in rinse aid chamber.
Note : If you have used an extra feature on the latest washing
program, this feature will remain active also on the next washing
program. If you do not want to use this feature on the newly
selected washing program, press the selected feature button
again, and check that the light on the button goes off.
5
Loading ...
Loading ...
Loading ...