Loading ...
Loading ...
Loading ...
Umbau- und Montageanweisung
M.-Nr. 11245731 22 von 62
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten. 17.03.2021
Quantity Mat. no. Designation
1 3mm stainless-steel drill bit
1 3.5mm Allen key or 0.6x3.5mm slotted screwdriver bit
Tip
This kit includes parts for both lotus-white and stainless-steel lids. Use the parts that match the washer's lid.
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A All appropriate safety regulations must be taken into account.
A Read the technical service documentation (TSD) before starting service work.
Risk of injury during installation
DANGER
Risk of electric shock. Danger due to live parts.
A Before starting any service work, the machine must be disconnected from power.
DANGER
Risk of accident
A Stacking-kit installation can only be carried out with the washer and dryer not installed. For uninstallation, see the
appropriate operating instructions.
A Ensure that children or pets cannot access the work area while installation work is being carried out.
DANGER
Risk of crushing
A Wear slip-proof working gloves and safety shoes.
A When carrying out work, ensure that body parts, especially hands and feet, are not positioned under or between
machines.
DANGER
There is a risk of injury, particularly spinal injuries, as the dryer must be lifted on top of the washer for
installation.
A The relation of the weight of the machine to the physical strength of the technician must be taken into account.
For machine weight details, see the operating instructions.
Installing the APCL 001 stacking kit
Lotus-white lid
A Remove the protective film from the frame.
A Lay the frame on the lid flush with the back of the machine, level it and mark 4 holes (1); see Fig. 1.
A Pierce the screw caps on the sides of the lid with a screwdriver (A); see Fig. 2.
The screw caps will be damaged and must be replaced.
Loading ...
Loading ...
Loading ...