Loading ...
Loading ...
Loading ...
I
I RCT7.6 Rev.l.4.indd 8-9
Disassembleboxand removethe cardboardpackaging that is not beneaththe treadmill. Do not attempt to
lift the treadmill at this time. Removeplastic wrap from consolemasts.
*NOTE: During each assemblystep, ensurethat ALLnuts and bolts are in place and partially threaded in
beforecompletelytightening any ONEbolt. NOTE-A light application of grease may aid in the installation of
hardware.Anygrease,such as lithium bikegreaseis recommended.
__ BOLT(A)
65mm
Qty:4
FLATWASHER(B)
Qty:4
LEADWIRE RIGHTCONSOLEMAST CONSOLECABLE
A) OpenHARDWAREBAG I.
B) Pull LEADWIREthroughRIGHT
CONSOLEMASTto drag upward.
c)
PlaceRIGHTCONSOLEMAST
into upright position using2
DOLTS(A)and 2 FLATWASHERS
(B), then tighten. Be sureto
hold the CONSOLEMASTfirmly,
as it will not stay in the upright
positionon its own.
*NOTE:Donotpinch CONSOLE
CABLEwhenplacing the mast
onto themain frame.
CONSOLEMAST
FLATWASHERS(B)
BOLT(A)
d) Repeaton the left side.
*NOTE:Thereis no wirein the
LEFTCONSOLEMAST.
NOTE:Thereis nohardwarebagfor this step.
A) Lift theRUNNINGDECKuntil LOCKLATCHonside of treadmill is fully engaged.
B) RemoveCONSOLEfrom boxand placeout of the way.
C) Lowerthe treadmill RUNNINGDECKfrom the foldedposition by steppingon LOCKLATCH
on the bottomleft side of the deck.
SCREW(C)
12rnrn
Qty:2
A)
D)
OpenHARDWAREBAG3.
Slideleft ROLLERENDCAPonto
MAINFRAMEand attach with
SCREW(C).
ROLLERENDCAP
SCREW(C)__.-
MAINFRAME
C) Repeaton otherside.
%_ _,4
7/17/06 4:50:34 PM I
Loading ...
Loading ...
Loading ...