Loading ...
Loading ...
Loading ...
9
INSTALLATION INSTRUCTIONS
Placing the Mounting Plate
1. Open the microwave box, and remove the microwave. It
will be wrapped in a plastic bag.
2. Remove the plastic bag, being careful to save the upper
foam, where the mounting bracket is located.
3. Remove the mounting bracket from the upper foam.
Finding your Wall Studs
NOTE: The microwave must be anchored to at least one
wall stud.
Locating a wall stud can be done by using a magnetic
stud-finder or tapping lightly across the mounting surface
to find a solid sound. The location of the solid sound
should be the location of the stud.
1. Find the center of the stud by probing a small nail
into the wall to find the edges of the stud.
2. Place a mark halfway between the edges. The center
of the adjacent stud should be 16” or 24” from this
mark.
3. Draw a line down the center of the wall studs.
Loading ...
Loading ...
Loading ...