Loading ...
Loading ...
Loading ...
23
Installation Instructions for Recirculating Microwaves
Attaching the Mounting Plate
Attach the mounting plate to the wall using the wing nuts and screws. At least one wood screw must
be used to attach the mounting template to the wall stud.
1. Remove the toggle wings from the bolts.
2. Insert the bolts into the mounting template through the holes designed to go into drywall, and
reattach the toggle wings to ¾” onto each bolt.
3. Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to
mount the plate.
NOTE: Before tightening toggle bolts and wood screw, make sure the bottom of the mounting plate
touches the bottom of the cabinet when pushed flush against the wall and that the plate is
properly centered under the cabinet.
Prepare the Top of the Cabinet
You need to drill holes for the top support screws large enough for the power cord to fit through, and
a cutout large enough for the exhaust adaptor.
• Read the instructions on the TOP CABINET
TEMPLATE
• Tape it underneath the top cabinet bottom
• Drill the appropriate holes, following the
instructions on the TOP CABINET
TEMPLATE
CAUTION: Wear safety goggles when
drilling holes in the cabinet bottom.
Loading ...
Loading ...
Loading ...