Loading ...
Loading ...
Loading ...
7
Fitter Plate
Screw
Fitter Plate
Light Kit
9-Pin
Connector
Canopy
J-Shaped Slot
Round
Hole
Blade Arm
Blade Screw
Blade Washer
Metal Washer
Blade
Mounting Bracket Screw
Blade Arm
Motor Screw
ASSEMBLY INSTRUCTIONS
11
10
10. Insert the blade screws along with the metal washers
and blade washers through the blade and into the blade
arm. Tighten each blade screw with a Phillips screwdriver
(not included), starting with the one in the middle. Repeat
this step for the remaining blades and blade arms.
11. Install the blade arm to the underside of the motor
assembly with previously removed motor screws. Tighten
each blade arm completely before moving to the next.
To install the fan without the light kit, skip to step 15.
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy in a clockwise direction until the
mounting bracket screws are completely engaged in
the J-shaped slots. Install the two previously removed
mounting bracket screws in the round holes. Securely
tighten all mounting bracket screws.
9
12
12. Remove the three tter plate screws preassembled to
the tter plate. Then, connect the 9-pin connector from fan
to the 9-pin connector from the light kit. Secure the light
kit with the tter plate screws.
Loading ...
Loading ...
Loading ...