Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
1
4
3
4. Remove the downrod clip and downrod pin from the
downrod. Then, loosen but don’t remove the two set
screws at the top of the yoke.
2
Mounting
Bracket Screw
Washer
Motor
Assembly
Downrod
Downrod
Pin
Set Screw
Yoke
Downrod
Clip
Motor Screw
Motor Block
3. Remove the ten motor screws, washers, and ve motor
blocks from the underside of the motor. Discard the motor
blocks and washers, but save the motor screws for blade
arm installation.
2. Loosen all four mounting bracket screws located on the
mounting bracket and completely remove the two screws
from the round holes in the canopy. Save the screws for
later. Remove the canopy from the mounting bracket.
Then, install the mounting bracket to the outlet box (sold
separately) using the screws and washers provided with
the outlet box.
WARNING: To reduce the risk of re, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
1.Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
Loading ...
Loading ...
Loading ...