Loading ...
Loading ...
Loading ...
26
MAINTAININGYOURRANGE
REPLACINGTHEOVENLIGHTBULB
WARNING!
Disconnectpowerbeforeservicingunit.
To replace the oven light bulb, unscrew the
protectioncapthatprojectsoutinsidetheoven.
Spare bulbs are available at factory‐authorized
partsresellerslistedonpage4.
Alternatively use comm ercial bulbs type [list
SPECS]
COOLINGFANFAILURE
Bertazzoni ranges are equipped with a cooling
fan. The fan starts operating each time the oven
knobisonapositiondifferentfrom0(zero).
The fancirculates the air between the control
panel and the oven door, allowing the control
panel and the oven door
to remain cool while
cooking.
Malfunctionofthecoolingfanisindicatedbythe
FANFA ILURElight situatedat theleft side ofthe
control panel. If the light is on, turn off all
burnersassoonaspossibleandcallthecustomer
service hotline to schedule service by a factory
‐
trainedprofessional.
CLEANINGYOURRANGE
ATTENTION: during cleaning operation never
move the appliance from its foreseen original
installationposition.
ATTENTION!Neveruseabrasivecleaners!
Scratches on the stainless steel surfaces are
permanent.
Donotcleantherangewhenhot!
Cleaning after installation: use a stainless steel
cleaning product or wipe to eliminate the glue
residues of the blue protection film after
removal.
Cleaning the worktop: periodically clean the
burnerheads,
thecastironpansupportsandthe
burner caps using warm water. Remove burned
food and fat residues with a rubber spatula . If
food residue prevent the smooth operation of
the control knobs, call the customer servce
hotline to schedule service by a factory‐trained
professional.
Cleaning stainless steel:
for best results use a
stainlesssteelcleanerproductwithasoftsponge
or wipe. Alternatively use a soft sponge or cloth
witha warm soapandwatersolution. Neveruse
abrasivepowdersorliquids!
Cleaning the burner caps: lift the burner caps
fromtheburnerheadsandwashthemin
awarm
soap and water solution. Dry thoroughly before
usingthemagain.Beforereinstallingthemonthe
burner head, check that the gas flow holes are
not clogged with food residues or cleaning
productresidues.
Cleaning Enamel: enamelled parts should be
cleaned frequently with awarm soap and water
solution applied
with a soft sponge or wipe.
Never use abrasive powders or liquids! Do not
leave acid or alkaline substances on the
enamelled parts (such as vinegar, lemon juice,
salt,tomato sauce,etc.). Usearubberspatula to
removefatresidues.
Cleaning glass door:cleantheglass using a non‐
abrasive sponge
or wipe with a warm soap and
warm water solution. Use a rubber spatula to
removefatresidues.
ATTENTION: while cleaning the door, avoid
spillage of food resideues and cleaning products
in the venting holes situated on the top side of
the door. To clean the inside of the oven
door,
callafactory‐trainedprofessional.
ATTENTION:for furtherdetails aboutcleaning of
the appliance, please contact your appliance
retailer.
Loading ...
Loading ...