Loading ...
Loading ...
Loading ...
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
To monitor with a handset
The internal baby monitor feature is available
between handsets.
1 MMENUN#268
2 M
bN: “On” a MSELECTN
3 M
bN: Select the desired handset’s number
to monitor with. a MSAVEN
R “Baby monitor” will be displayed.
R The registered handset’s name/
number is displayed.
Note:
R When this feature is on, another handset
can hear the monitored handset by making
an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
This feature is only available for landline.
n From the phonebook:
1 MMENUN#268
2 M
bN: “On” a MSELECTN
3 M
bN: Select “Outgoing call” to
monitor from outside. a MADDN
4 M
bN: “Phonebook” a MSELECTN
5 M
bN: Select the phonebook entry. a
MSAVEN
R “Baby monitor” will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1 MMENUN#268
2 M
bN: “On” a MSELECTN
3 MbN: Select “Outgoing call” to
monitor from outside. a MADDN
4 M
bN: “Manual” a MSELECTN
5 Enter the desired name. a MOKN
6 Enter the desired number. a MOKN
a MSELECTN
R “Baby monitor” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to “On”.
1 Press MMENUN on the handset being
monitored.
2 M
bN: “On/Off” a MSELECTN
3 M
bN: “Off” a MSELECTN a MOFFN
Editing an outside monitoring number
1 Press MMENUN on the handset being
monitored.
2 M
bN: “On/Off” a MSELECTN
3 M
bN: “On” a MSELECTN
4 M
bN: Select the outside line. a MMENUN
5 M
bN: “Edit” a MSELECTN
6 Edit the name if necessary. a MOKN
7 Edit the phone number if necessary. a
MOKN a MSELECTN
Erasing an outside monitoring
number
1 Press MMENUN on the handset being
monitored.
2 M
bN: “On/Off” a MSELECTN
3 M
bN: “On” a MSELECTN
4 M
bN: Select the outside line. a MMENUN
5 M
bN: “Erase” a MSELECTN
6 M
bN: “Yes” a MSELECTN a MOFFN
50
For assistance, please visit http://shop.panasonic.com/support
Programming
TGD86x(en)_1216_ver041.pdf 50 2020/12/16 14:48:04
Loading ...
Loading ...
Loading ...