Loading ...
Loading ...
Loading ...
76
TO TILT HEAD
Note: Always ensure that the heater is switched off,
disconnected from the mains power supply and is cold to
touch. If heater has been recently used, please leave the
wall heater one (1) hour to cool before tilting head.
1. Loosen the locking bolt and remove.
2. Loosen the head tilt bolt, do not remove.
3. Head can be tilted through 30°.
4. Tighten the head tilt bolt when the desired angle is
achieved.
5. Insert and tighten the locking bolt if possible to stop
any unintentional movement of the heater.
Note: If locking bolt can not be fitted ensure the head tilt
bolt is very tight.
Head
Tilt Bolt
30°
CEILING MOUNT WITH CHAIN
Only use this mounting option if your ceiling is too high.
1. Attach the bracket (C) as noted below.
2. Cut chain (D), not supplied, to desired length.
3. Using nut and bolt attach chain to bracket (C) and bracket (B).
4. Heater is now mounted and ready for use.
Ceiling Chain Mount
(C) Ceiling Bracket
(D) Chain, not supplied
(B) Heater Rear Bracket
(A) Heater Body
(A) Bolt & Nut,
not supplied
Locking Bolt
Loading ...
Loading ...