Craftsman 917272243 lawn tractor

User Manual - Page 30

For 917272243.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM CAUSE
Will not start 1, Out _ fuel
2.
3.
4.
5.
6.
7.
8.
9.
Hard to Start
Englnewill not
turn over
Engine not "CHOKED"
properly.
Engine flooded.
Bad spark plug.
Dirty air filter.
Dirty fuel filter.
Water in fuel.
Loose or damaged wiring.
Carburetor out of adjustment,
10.Engine valves out of
adjustment.
1. Dirty air filter.
2. Bad spark plug.
3. Weak or dead battery.
4. Dirty fuel filter.
5. Stale or dirty fuel.
6. Loose or damaged wiring.
7. Carburetor out ofadjustment.
8. Enginevalvesoutof
adjustment.
1. Brake pedal not depressed.
2. Attachment clutchis
engaged.
3. Weak or dead battery.
4, Blown fuse.
5. Corroded battery terminals.
6. Loose or damaged wiring.
7. Faulty ignition switch.
8, Faultysolenoid or starter.
(_0RRECTION
1. Fill fuel tank,
2. See "TO START ENGINE"
in Operation section.
3. Wait several minutes before
attempting to start.
4. Replace spark plug.
5. Clean/replece air filter.
6. Replace fuel filter.
7. Drain fuel tank and carbure-
tor, refilltank with fresh
gasoline end replace fuel
filter.
8. Check all wiring.
9. See "To Adjust Carburetor"
in Service Adjustments
section.
1O.Contact a Sears or other
qualified service center.
1. Clean/replace air filter.
2. Replace spark plug.
3. Recharge or replace battery.
4. Replace fuel filter.
5. Drain fuel tank and refill with
fresh gasoline.
6. Check all wiring.
7. See "To Adjust Carburetor" in
Service Adjustments
section.
8. Contact a Sears or other
qualified service center.
1. Depress brake pedal.
2. Disengage attachment
clutch,
3. Recharge or replace battery.
4. Replace fuse.
5. Clean battery terminals.
6. Check all wiring.
i 7. Check/replace ignition
switch.
8. Check/replace solenoid or
starter.
9. Contact a Sears or other
qualified service center.
9. Faulty operator presence
switch(as).
5nglne clicks but 1. Weak or dead battery. 1. Recharge or replace battery.
t_lll not start 2. Corroded battery terminals. 2. Clean battery terminals.
3. Loose or damaged wiring. 3. Check all wiring.
4. Faultysolenoid or starter. 4. Check/replace solenoid or
starter.
,oss of power 1. Cuttingtoo much grass/too 1. Set in =Higher Cut" position/
fast. reduce speed.
2. Throttle in "CHOKE" 2. Adjustthrottle control.
position.
3O
Loading ...
Loading ...
Loading ...